Our wine making became more of a hobby when we bought our first carboy. Since then we have tinkered with how we like to set them up, we first started putting chalk stickers on them and later we found some thermometer stickers. My wife and I are sort of a freaks about organization and tracking information. We like to mark our bottles with flavor, date started and date it should move on to the next step. This is how we do it now.
Enter chalkboard paint…
This stuff is great. We use it for a lot of different projects, so I usually have some on hand. Start by gathering the following items:
- 3 or 5 gallon carboy
- masking tape (preferably wide tape)
- computer/copy paper (newspaper will work too)
- thermometer sticker (available at most brew stores)
- chalkboard paint
- exacto blade
- emery/sand paper.
I love these thermometer stickers! We put them on carboys and bottles. I even have one on the inside of one of the house windows to monitor the outside temperature.
It is important to monitor the temperature of your wine during fermentation and racking. I place the thermometer sticker sideways on the carboy because it fits better on the carboy I use…you can put it where you like. I just find putting it with the label makes it easy to see.
Next, I use the masking tape and computer paper to protect the carboy during spaying. I like to try and keep the edges as straight as possible and evenly spaced. That is OCD talking.
TIP: Using the wide masking tape makes it easier to tape to the carboy while leaving room for the paper. I usually secure only one side of the tape, put the paper on and then make sure the tape is secure on the paint side.
After securing the tape, you will want to lightly sand the glass where you are going to paint it. This helps the paint stick. I used emery paper. Emery paper is a special type of sand paper for glass. Sand paper will work, I only have the emery stuff because I have a glass bottle cutter it came with. We use the bottle cutter to make candles (a topic for another day!). Be careful to rub the paper in small circles and try not to “sand” the masking tape.
Once you are satisfied with this, it is time to paint!
Patience is a virtue at this point. Take your time and put several light coats on and follow the directions on the can. I used Krylon and their instructions state you have to put two coats on to get a good chalkboard surface. Each coat can be applied in 15 minute increments (I put on four to five coats at minimum). The paint is dry in the first three hours but needs at least 24 hours to cure before applying any chalk. It is also recommended to do this outdoors.
After waiting three hours you can remove the paper and masking tape. I like to lightly score the line between the tape and paint with an exacto blade to help keep the edge clean. If you have some over spray or paint spots outside your line, you can carefully scrape it off with a razor blade.
After 24 hours your carboy is ready for a batch! Now you can stay organized and write on the surface to keep track of flavors and batches.
TIP: The chalkboard paint surface will work best if you prepare the surface before using it. To do this color the entire surface with chalk and wipe clean with a damp rag. You can use this trick for any chalkboard paint project.
Hope you enjoy!